mbr25xxct, mbrf25xxct, mbrb25xxct www.vishay.com vishay general semiconductor revision: 14-jun-17 1 document number: 88675 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dual common cathode schottky rectifier features ? power pack ? guardring for overvoltage protection ? lower power losses, high efficiency ? low forward voltage drop ? high forward surge capability ? high frequency operation ? meets msl level 1, per j-st d-020, lf maximum peak of 245 c (for d 2 pak (to-263ab) package) ? solder bath temperature 275 c maximum, 10 s, per jesd 22-b106 (for to-220ab and ito-220ab package) ? aec-q101 qualified available - automotive ordering code: base p/nhe3_a ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 typical applications for use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, dc/dc converters, or polarity protection application. mechanical data case: to-220ab, ito-220ab, d 2 pak ( to-263ab) epoxy meets ul 94 v-0 flammability rating base p/n-e3 - rohs-co mpliant, commercial grade base p/nhe3 - rohs-compliant, aec-q101 qualified base p/nhe3_x - rohs-compl iant, aec-q101 qualified (_x denotes revision code, e.g. a, b, ...) terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix meets jesd 201 cla ss 2 whisker test, he3 suffix meets jesd 201 class 2 whisker test polarity: as marked mounting torque: 10 in-lbs maximum primary characteristics i f(av) 2 x 12.5 a v rrm 35 v, 45 v i fsm 150 a v f 0.73 v at 30 a t j max. 150 c package to-220ab, ito-220ab, d 2 pak (to-263ab) circuit configurat ion common cathode case pin 2 pin 1 pin 3 to-220ab mbr25xxct ito-220ab mbrf25xxct mbrb25xxct pin 1 pin 2 k heatsink 1 2 3 1 2 k d 2 pak (to-263ab) pin 2 pin 1 pin 3 1 2 3 maximum ratings (t c = 25 c unless otherwise noted) parameter symbol mbr2535ct mbr2545ct unit maximum repetitive peak reverse voltage v rrm 35 45 v working peak reverse voltage v rwm 35 45 maximum dc blocking voltage v dc 35 45 maximum average forward rectified current at t c = 130 c total device i f(av) 25 a per diode 12.5 peak forward surge current 8.3 ms sing le half sine-wave superimposed on rated load per diode i fsm 150 a peak repetitive reverse surge current per diode at t p = 2 s, 1 khz i rrm 1.0 peak non-repetitive reverse energy (8 /20 s waveform) per diode e rsm 25 mj electrostatic discharge capacitor voltage human body model: c = 100 pf, r = 1.5 k v c 25 kv voltage rate of change (rated v r ) dv/dt 10 000 v/s operating junction temperature range t j -65 to +150 c storage temperature range t stg -65 to +175 isolation voltage (ito-220ab only) from terminal to heatsink t = 1 min v ac 1500 v
mbr25xxct, mbrf25xxct, mbrb25xxct www.vishay.com vishay general semiconductor revision: 14-jun-17 2 document number: 88675 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) pulse test: 300 s pulse width, 1 % duty cycle note (1) aec-q101 qualified electrical characteristics (t c = 25 c unless otherwise noted) parameter test conditions symbol mbr2535ct mbr2545ct unit maximum instantaneous forward voltage per diode i f = 15 a t c = 25 c v f (1) - v t c = 125 c - i f = 30 a t c = 25 c 0.82 t c = 125 c 0.73 maximum instantaneous reverse current at blocking volt age per diode t c = 25 c i r (1) 0.2 ma t c = 125 c 40 thermal characteristics (t c = 25 c unless otherwise noted) parameter symbol mbr mbrf mbrb unit typical thermal resistance from junction to case per diode r jc 1.5 4.5 1.5 c/w ordering information (example) package preferred p/n unit weight (g) pac kage code base quantity delivery mode to-220ab MBR2545CT-E3/45 1.85 45 50/tube tube ito-220ab mbrf2545ct-e3/45 1.99 45 50/tube tube to-263ab mbrb2545ct-e3/45 1.35 45 50/tube tube to-263ab mbrb2545ct-e3/81 1.3 5 81 800/reel tape and reel to-220ab MBR2545CT-E3/4w 1.85 4w 50/tube tube to-220ab mbr2545cthe3/45 (1) 1.85 45 50/tube tube ito-220ab mbrf2545cthe3/45 (1) 1.99 45 50/tube tube to-263ab mbrb2545cthe3/45 (1) 1.35 45 50/tube tube to-263ab mbrb2545cthe3/81 (1) 1.35 81 800/reel tape and reel to-263ab mbrb2545cthe3_a/p (1) 1.35 p 50/tube tube to-263ab mbrb2545cthe3_a/i (1) 1.35 i 800/reel tape and reel
mbr25xxct, mbrf25xxct, mbrb25xxct www.vishay.com vishay general semiconductor revision: 14-jun-17 3 document number: 88675 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and characteristics curves (t c = 25 c unless otherwise noted) fig. 1 - forward current derating curve fig. 2 - maximum non-repeti tive peak forward surge current per diode fig. 3 - typical instantaneous forward characteristics per diode fig. 4 - typical reverse characteristics per diode fig. 5 - typical junction capacitance per diode fig. 6 - typical transient thermal impedance per diode 0 6 18 12 30 0 50 100 150 24 resistive or inductive load average forward cu rrent (a) case temperature (c) 0 25 75 50 125 100 150 1 100 10 t j = t j max. 8.3 ms single half sine-wave number of cycles at 60 hz peak forward surge current (a) 100 10 1.0 0.1 0.01 mbr2535ct, mbr2545ct 0 0.2 0 . 1 5 . 0 1 . 0 0.4 0.3 0.6 0.7 0.8 0.9 t j = 150 c t j = 25 c pulse width = 300 s 1 % duty cycle ) a ( t n e r r u c d r a w r o f s u o e n a t n a t s n i instantaneous forward voltage (v) 1 10 100 0.01 0.001 0.1 mbr2535ct, mbr2545ct 20 0 0 1 0 406080 t j = 125 c t j = 25 c t j = 75 c ) a m ( t n e r r u c e s r e v e r s u o e n a t n a t s n i percent of rated peak reverse voltage (%) 10 1 100 1000 10 000 100 0.1 mbr2535ct, mbr2545ct t j = 25 c f = 1.0 mhz v sig = 50 mv p-p reverse voltage (v) ) f p ( e c n a t i c a p a c n o i t c n u j 0.01 10 1 100 10 100 0.1 0.1 1 t - pulse duration (s) transient thermal impedance (c/w)
mbr25xxct, mbrf25xxct, mbrb25xxct www.vishay.com vishay general semiconductor revision: 14-jun-17 4 document number: 88675 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package outline dimensions in inches (millimeters) to-220ab 0.113 (2.87) 0.103 (2.62) 0.370 (9.40) 0.360 (9.14) 0.415 (10.54) max. 0.635 (16.13) 0.625 (15.87) pin 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 0.205 (5.20) 0.195 (4.95) 0.035 (0.90) 0.028 (0.70) 0.154 (3.91) 0.148 (3.74) 13 2 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.145 (3.68) 0.135 (3.43) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.603 (15.32) 0.573 (14.55) ito-220ab 0.076 (1.93) ref. 45 ref. pin 3 2 1 0.404 (10.26) 0.384 (9.75) 0.076 (1.93) ref. 0.600 (15.24) 0.580 (14.73) 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.191 (4.85) 0.171 (4.35) 0.671 (17.04) 0.651 (16.54) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.057 (1.45) 0.045 (1.14) 0.028 (0.71) 0.020 (0.51) 0.110 (2.79) 0.100 (2.54) 7 ref. 0.135 (3.43) dia. 0.122 (3.08) dia. 0.110 (2.79) 0.100 (2.54) 0.190 (4.83) 0.170 (4.32) 7 ref. 7 ref. 0.140 (3.56) dia. 0.125 (3.17) dia. 0.350 (8.89) 0.330 (8.38) d 2 pak (to-263ab) mounting pad layout 0.670 (17.02) 0.591 (15.00) 0.105 (2.67) 0.095 (2.41) 0.08 (2.032) min. 0.15 (3.81) min. 0.33 (8.38) min. 0.42 (10.66) min. 12 k k 0.140 (3.56) 0.110 (2.79) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.090 (2.29) 0 to 0.01 (0 to 0.254) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.190 (4.83) 0.160 (4.06) 0.205 (5.20) 0.195 (4.95) 0.624 (15.85) 0.591 (15.00) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.360 (9.14) 0.320 (8.13) 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) min.
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
